Mould Inject Parts Industrial Ultrasonic Cleaner Removal Oil 28khz/40khz CE Approval

Industrial mould inject parts removal oil 28khz/40khz ultrasonic cleaning machines

Equipment usage: used for precision plastic mold, hardware, module, mold, mold core, pin inlay, insert decontamination, high temperature electrolytic ultrasonic (plastic mold) cleaning machine cleaning process description
Electrolytic ultrasonic system is composed of ultrasonic generation system, electrolytic circuit system, circulating filtration system, control system, special gold cleaning fluid and water-based rust inhibitor.
1. The electrolytic cleaning system is to send gas to the metal surface, and use the effect of sauna to remove the dirt and impurities on the metal surface. It can also completely remove the rust spots, carbon deposits, gas, resin components, moisture and oil stains on the mold. Through ultrasonic vibration, the dirt will be peeled off and floated up, and the metal will be attached to the cathode, even the dirt in a small corner can be completely removed. 2. Restore the metal to the original 3. It can remove dirt even in complex shape. 4. It can completely clean and decontaminate. 5. It has good rust removal and rust prevention effect. 6. It can save one hour than manual cleaning. 7. It is more environmentally friendly and safer than using organic solvent. 8. Greatly reduced the bad rate after cleaning.
Process: 1. Wash the gold mold for 6-15 minutes, 2. Rinse with water for 2 minutes, 3. Rust prevention for 3 minutes.

Industrial mould inject parts removal oil 28khz/40khz ultrasonic cleaning machines