Ours ultrasonic Co.,Ltd
ULTRASONIC SOLUTION MANUFACTURER
Add to Cart
6L Ultrasonic Cleaner Fast Remove Residual Particle With Industrial Transducers
The operation instructions are as follows:
1. After opening the box, check whether the parts are loose or not.
2. Place the machine in a ventilated and dry place to ensure that the machine is in a horizontal position.
3. Add appropriate amount of cleaning liquid into the cleaning tank according to the cleaning requirements.
4. If heating is required, start the heating controller (HEATER) and rotate the temperature to the required temperature. The temperature should be 40-60 degrees (heating is not recommended under normal circumstances).
5. Connect the power plug correctly: Make sure the power supply is grounded reliably!
6. Start the TIME, clockwise to ON, with a 0-30 minute timing system. Indicator lights are on and a "hiccup" sound is emitted to show that the ultrasonic wave is running normally or counterclockwise to "ON", which is a long-time ultrasonic operation switch. The ultrasonic cleaning is not controlled regularly until the manual shutdown.
7. Stop the cleaning process:
1) Rotate the ultrasonic timer switch to the OFF closed position, the ultrasonic operation stops and the indicator lights go out.
2) Rotate the heating controller to the "OFF" position and turn off the indicator.
3) disconnect the whole power supply;
4) Remove the cleaning liquid and clean the tank body and its periphery with a clean cloth for the next use.
APPLICATION RANGES:
| DOMESTIC | |
| Jewelry | Necklaces, rings, bracelets, earrings etc |
| Watches and glasses | Waterproof wristwatches, watch chains, glasses, sunglasses etc |
| Toiletry items | Electric toothbrush heads, electric shaver heads, razor blades, combs, toothbrushes, dentures etc |
| Discs | CDs, DVDs, DVDs, CD-R discs, laserdisc etc |
| Office equipment | Printed heads, fountain pen nibs, wax or rubber stamps , Calligraphic pens/ nibs etc |
| Model | Tank Size | Unit Size | Volume | Power | Ultrasonic Frequency | Heating Power | Timer | Heating |
| L x W x H(mm) | L x W x H(mm) | (L) | (W) | (KHz) | (W) | (MIN) | (℃) | |
| ARS-XQXJ-103H | 150x140x65 | 190x170x185 | 1.3 | 50 | 40 | 100 | 1-99 | 0-80 |
| ARS-XQXJ-002H | 150x140x100 | 190x170x220 | 2 | 50 | 100 | 1-99 | 0-80 | |
| ARS-XQXJ-003H | 240x140x100 | 270x170x240 | 3 | 100 | 100 | 1-99 | 0-80 | |
| ARS-XQXJ-006H | 300x155x150 | 330x180x310 | 6 | 150 | 300 | 1-99 | 0-80 | |
| ARS-XQXJ-010H | 300x240x150 | 330x270x310 | 9 | 200 | 300 | 1-99 | 0-80 | |
| ARS-XQXJ-013H | 355x325x150 | 360x330x310 | 13 | 300 | 400 | 1-99 | 0-80 | |
| ARS-XQXJ-020H | 530x325x150 | 550x330x310 | 20 | 400 | 500 | 1-99 | 0-80 | |
| ARS-XQXJ-027H | 530x325x200 | 550x330x360 | 27 | 500 | 500 | 1-99 | 0-80 |
6L Ultrasonic Cleaner Fast Remove Residual Particle With Industrial Transducers